Prismasync System Software V8.5 Features - Canon varioPRINT 6000 TITAN Series Manual

Canon

2.4.2 PRISMAsync System Software V8.5 Features

The features and improvements included with PRISMAsync V8.5 (PRISMAsync
Mark 8.1.2) are:
• "Advanced Imposition Layout" Option – Using the new option, operators
can set standard and custom imposition layout patterns for non-variable data
jobs directly at the local UI:
• Fold imposition
• Same Up
• Cut & Stack
• Manual gutters (across sheet)
• Align & Shift (across sheet)
• Print/Trim Marks
• Multiple Job Edit – Users can apply the same job parameters to multiple jobs
at the same time using an Automated Workflow.
• Edit/View Automated Workflow (AWF) settings at UI – Automated Workflow
can be set at the engine in addition to in the Settings Editor.
• Secure JMF - An increased level of security is introduced by extending the
JMF support settings group to enable configuring JMF over HTTPS.
• JMF Status Improvement - In addition to DeviceStatus and Status details, the
new and always-unique "StatusDescription" helps operators understand the
cause of an issue and how to address it.
• Warning Light Customizing for Consumables – Users can customize which
consumable situations cause display of the warning light. Users can select from
Input Trays, Output Trays, Toner Consumables, and Finishers Waste.
• Barcode Printout on Banner Page – Job names can be printed in Code39
barcode on the job banner or trailer page, allowing operators to scan the job
name during the production print flow.
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
Page 11