Canon imageRUNNER ADVANCE C350 series Service Manual page 902

■ DSPLY-SW
COPIER> OPTION> DSPLY-SW
UI-COPY Display/hide of copy screen
Lv.2 Details To set whether to display or hide the copy function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-BOX Display/hide of Inbox screen
Lv.2 Details To set whether to display or hide the Inbox function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: No Inbox function (Storing is not available even with PDL to
Inbox.)
1: Inbox function is active
2: Inbox function is active (with limitation; Storing is available with
PDL to Inbox despite no display on the Control Panel/remote UI)
Default value 1
Related UI menu Preferences> Display Settings> Store Location Display Settings>
Mail Box
The setting value is changed to 2 when turning OFF the foregoing
user mode, and the value is changed to 1 when turning ON the mode
at power-off/on.
As the setting value of this service mode is changed, the setting
value of the foregoing user mode is also changed.
UI-SEND Display/hide of send screen
Lv.2 Details To set whether to display or hide the SEND function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-FAX Display/hide of FAX screen
Lv.2 Details To set whether to display or hide the FAX function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
8
Service Mode > COPIER > OPTION > DSPLY-SW
8 Service Mode > COPIER > OPTION > DSPLY-SW
COPIER> OPTION> DSPLY-SW
T-LW-LVL Dspl timing of toner level warning mssg
Lv.2 Details To set the threshold value of residual toner in the toner bottle.
When the residual toner level becomes lower than the threshold, a
warning message of "Toner is low. Replacement not yet needed." is
displayed on the Control Panel.
Use case - Upon user's request
- At the timing that the service engineer visits to the user, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When setting a value smaller than the initial value, absence of toner
may be displayed before toner level warning message.
Display/adj/set range 5 to 100
Unit 1 %
Default value It differs according to the location.
Related service mode COPIER> OPTION> DSPLY-SW> TNR-WARN
NWERR-SW OFF/ON of network-related error display
Lv.2 Details To set OFF/ON of network-related error message display.
When setting "0: OFF" while the machine is not connected to
network, the error message "Check the network connection." is not
displayed.
Use case When using the machine as a copy machine
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0 (Coin-operated model)/1 (Normal model)
FXMSG-SW ON/OFF of Fixing Assembly replace mssg
Lv.2 Details To set whether to display the message prompting to replace the
Fixing Assembly on the Control Panel when the counter for life
judgment reaches the specified value.
When FXMSG-SW is 1 and COPIER> OPTION> FNC-SW>
FXWRNLVL is 1 (default: 0), the Fixing Assembly life detection is
performed.
When the Fixing Assembly reaches its life, the Fixing Assembly
replacement message "Prepare new fixing assembly." is displayed.
Use case When displaying the Fixing Assembly replacement message
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related service mode COPIER> OPTION> FNC-SW> FXWRNLVL
8-132
8-132