Canon imageRUNNER ADVANCE C350 series Service Manual page 945

COPIER> OPTION> CST
CST3-U1 Set Cst3 area-spec stdrd size ppr ctgry1
Lv.1 Details To set the area-specific standard size paper category 1 used in
Cassette 3.
Use case When setting area-specific standard size paper for the Cassette 3
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 42
0 to 23 : Not use, 24: FLSC, 25: A-FLS, 26: OFI, 28: B-OFI, 34:
G-LGL, 37: M-OFI, 42: FA4
Default value 0
CST3-U2 Set Cst3 area-spec stdrd size ppr ctgry2
Lv.1 Details To set the area-specific standard size paper category 2 used in
Cassette 3.
Use case When setting area-specific standard size paper for the Cassette 3
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 44
0 to 13: Not use, 14: B5R, 23: K-LGLR, 32: G-LTRR, 41: 16KR, 44:
EXECR
Default value JP:44, USA:44, EUR:44, AU:44, CN:41, KR:44, TW:44, ASIA:44
Related UI menu Preferences> Paper Settings> A5R/STMTR Paper Selection
CST4-U1 Set Cst4 area-spec stdrd size ppr ctgry1
Lv.1 Details To set the area-specific standard size paper category 1 used in
Cassette 4.
Use case When setting area-specific standard size paper for the Cassette 4
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 42
0 to 23 : Not use, 24: FLSC, 25: A-FLS, 26: OFI, 28: B-OFI, 34:
G-LGL, 37: M-OFI, 42: FA4
Default value 0
CST4-U2 Set Cst4 area-spec stdrd size ppr ctgry2
Lv.1 Details To set the area-specific standard size paper category 2 used in
Cassette 4.
Use case When setting area-specific standard size paper for the Cassette 4
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 44
0 to 13: Not use, 14: B5R, 23: K-LGLR, 32: G-LTRR, 41: 16KR, 44:
EXECR
Default value JP:44, USA:44, EUR:44, AU:44, CN:41, KR:44, TW:44, ASIA:44
Related UI menu Preferences> Paper Settings> A5R/STMTR Paper Selection
8
Service Mode > COPIER > OPTION > ACC
T-8-52
8 Service Mode > COPIER > OPTION > ACC
■ ACC
COPIER> OPTION> ACC
COIN Setting of charge management
Lv.1 Details To set charging management method.
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution In case of setting "3", if "0 to 2" is changed to "3", the following items
are automatically set. After making a change, even though "3" is set
to "0 to 2" again, they will not be restored.
- COPIER> OPTION> USER> CONTROL, AFN-PSWD = 1
- COPIER> OPTION> NETWORK> DA-CNCT = 1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX = 0
- IE Settings> IE Function Priority = ON
- Preferences> Network> TCP/IP Settings> IPv4 Settings> IP
Address Range Settings> RX/Print Range: Permit IPv4 Address =
ON
- Preferences> Network> TCP/IP Settings> IPv6 Settings> IP
Address Range Settings> RX/Print Range: Permit IPv6 Address =
ON
- Preferences> Network> TCP/IP Settings> FTP Print Settings> Use
FTP Printing = OFF
- Preferences> Network> TCP/IP Settings> IPP Print Settings = ON
- Preferences> Network> SMB Server Settings> SMB Printer
Settings> Use SMB =ON
- Function Settings> Send> E-Mail/I-Fax Settings> Communication
Settings> SMTP RX, POP = OFF
In case of setting "4", if "0 to 2" is changed to "4", the following items
are automatically set. After making a change, even though "4" is set
to "0 to 2" again, they will not be restored.
- COPIER> OPTION> USER> AFN-PSWD = 1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX, UI-
RSCAN, UI-EPRNT, UI-HOLD = 0
- Management Settings>Device Management> Display Log=OFF
Display/adj/set range 0 to 7
0: No charge, 1: Charge with Coin Manager, 2 Charge with remote
counter, 3: Charge with DA (only in Japan), 4: Charge with this
machine itself, 5: New SC mode, 6: External charge mode 6, 7:
External charge mode 7
Default value 0
Related service mode COPIER> OPTION> USER> CONTROL
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
COPIER> OPTION> ACC> PDL-THR
Related UI menu Function Settings> Send> E-Mail/I-Fax Settings> Communication
Settings
Preferences> Network> TCP/IP Settings> DNS Settings> FTP Print
Settings, IPP Print Settings
Supplement/memo Control card can be used with "0: No charge".
DA: Digital Accessory
8-175
8-175