Canon imageRUNNER ADVANCE C350 series Service Manual page 869

COPIER> ADJUST> FEED-ADJ
ADJ-C3 Cassette 3 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 3.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
ADJ-C4 Cassette 4 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 4.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
ADJ-MF Write start pstn in horz scan: MP tray
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Multi-purpose Tray.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
8
Service Mode > COPIER > ADJUST > FEED-ADJ
8 Service Mode > COPIER > ADJUST > FEED-ADJ
COPIER> ADJUST> FEED-ADJ
ADJ-C1RE Write start pstn in horz scan:Cst1 2nd
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction for 2nd side when feeding paper from the Cassette 1.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger (An image moves to the right.)
-: Left margin becomes smaller (An image moves to the left.)
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
ADJ-C2RE Write start pstn in horz scan:Cst2 2nd
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction for 2nd side when feeding paper from the Cassette 2.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger (An image moves to the right.)
-: Left margin becomes smaller (An image moves to the left.)
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
ADJ-C3RE Write start pstn in horz scan:Cst3 2nd
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction for 2nd side when feeding paper from the Cassette 3.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger (An image moves to the right.)
-: Left margin becomes smaller (An image moves to the left.)
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
8-99
8-99