Formatting Flash Pcb Or Hdd - Canon imageRUNNER ADVANCE C350 series Service Manual

● [3]: Upgrade (Overwrite all)
Regardless of the system software version in the machine, all the system software in the USB
memory storage device is downloaded.
This machine is automatically restarted once writing process is completed. When writing
process is successfully completed, the machine is restarted with the new version of the
system software. When an error occurs, the machine is restarted with the previous version of
the system software.
NOTE:
All firmware update may take up to 25 minutes. To reduce downtime, we recommend
using Auto under normal condition.
Operation Procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press [1] and select the version of system software to be used on the screen for selecting
version.
4) Select [3]: Update (Overwrite all) to start downloading.
[3] - [0]: Execute download/ any key other than [0]: Return to the menu screen
During the download process, download status is displayed on the control panel.
When download is completed, this machine is automatically restarted to start writing to the
system software in the FLASH PCB. When writing to the Dcon (ACC1, CCM or CCB if there
is an option) is completed, the machine is automatically restarted. After writing of SafeCont is
completed, the machine is automatically restarted again.
5) When the main menu is displayed, press the removal key at the bottom right on the touch
panel and select removal of memory media device, and then remove the USB memory
storage device.
6
Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Formatting FLASH PCB or HDD
6 Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Formatting FLASH PCB or HDD

■ Formatting FLASH PCB or HDD

● Format Overview
The following 3 types of formatting/initialization methods are available with this machine. With
this machine, there is no function to format BOOTDEV only, which was available with the
existing machines.
• Disk Format: To initialize the entire HDD
• Flash Format: To initialize the entire FLASH PCB
• HDD Encryption Board Initialize: To initialize the HDD Encryption Board
For normal version update, there is no need to format the FLASH PCB/ HDD.
6-42
F-6-64
6-42