Network Settings - Canon imageRUNNER ADVANCE C350 series Service Manual

● Network Settings
1. Connecting to External Network
The method of connecting to external network is similar to a normal network connection
method. Refer to user manual of the device for details.
NOTE:
• See User Manual for how to connect the device to the external network.
• Before using UGW link or UI menu, see the sections below to prepare as required.
"Enabling UGW Link"
"Enabling [Update Firmware] Button of User Mode"
"Enabling [Install Application/Options] Button of User Mode"
NOTE:
"External Network" here means the network connecting the device to CDS via Internet.
2. Confirming URL Setting of Distribution Server
This section describes how to confirm the URL setting of the distribution server.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
6
Troubleshooting > Version Upgrade > Version Upgrade via CDS > Preparation
F-6-69
6 Troubleshooting > Version Upgrade > Version Upgrade via CDS > Preparation
3. Press [Software Management Settings] button.
4. Press [Settings] button.
6-47
F-6-70
F-6-71
6-47