2. Generating report file
After the "ACTIVE" blinks for 3 to 4 minutes, generation of a report file is complete as "OK!"
is displayed.
PJH-P-2
USBH-PRT
RPT-FILE
OK!
RPT2USB
3. Enter download mode.
4. Connect the USB memory storage device to the USB port.
5. Press the control panel keys. [8]:
[[[[[[[[[[[ Root Menu (USB) ]]]]]]]]]]]
---------------------------------------
[1]: Select Version
[4]: Clear/Format
[5]: Backup/Restore
[8]: Download File
[Reset]: Start shutdown sequence
8
Service Mode > Overview > The data output of the service data print > How to Move Service Print Files to a USB Memory Device
F-8-14
F-8-15
8
Service Mode > Overview > The data output of the service data print > How to Move Service Print Files to a USB Memory Device
6. Download ServicePrint.
Press the control panel keys. [4] -> [0]:
[4] ServicePrint : Transfer the report data from the machine to the USB memory device.
[[[[[[[ Download File Menu (USB) ]]]]]]]
----------------------------------------
[1]: SUBLOG Download
[4]: ServicePrint Download
[C]: Return to Main Menu
[Reset]: Start shutdown sequence
/[4] has been selected. Execute?/
- (OK):0 / (CANCEL):Any other keys -
NOTE:
•
If the downloaded file is opened as plain text, the paragraphs are misaligned, which
makes it difficult to read the data.
•
When the file is dragged to WordPad, an image similar to the image output on paper may
be displayed in some cases.
8-9
F-8-16
8-9