Canon imageRUNNER ADVANCE C350 series Service Manual page 910

COPIER> OPTION> IMG-FIX
FIXMIXBD Setting of media mixed mode
Lv.1 Details To set whether image quality or productivity to be prioritized when
media are mixed.
When the value is increased, downtime is increased because of
prioritizing image quality.
When the value is decreased, downtime is decreased, but uneven
gloss might occur.
Use case - If the fixing failure occurs in media mixed condition.
- When decreasing downtime in media mixed situation
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range -2 to 2
Default value 0
PRE-FXRL Pressure Roller soiling prevention mode
Lv.2 Details To set ON/OFF of Pressure Roller soiling prevention mode when
feeding calcium carbonate paper.
When 1 is set, the paper intervals become wider and temperature of
the Pressure Roller is increased. As a result, soiling on the Pressure
Roller is reduced, but productivity decreases.
Use case Upon user's request (prevention of soiled Pressure Roller)
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to get approval from the user by telling that productivity
decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
TMP-TB12 Fixing control temperature:Plain paper 3
Lv.1 Details To set the offset of fixing control temperature for plain paper 3 (91 to
105 g/m2).
As the value is incremented by 1, the control temperature is
increased by 5 deg C from the specified value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use case When offset/fixing failure occurs on plain paper 3
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image
failure occurs when setting an extreme value.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
8
Service Mode > COPIER > OPTION > IMG-FIX
8 Service Mode > COPIER > OPTION > IMG-FIX
COPIER> OPTION> IMG-FIX
TMP-TB13 Fixing control temperature: Rcycl ppr 2
Lv.1 Details To set the offset of fixing control temperature for recycled paper 2 (76
to 90 g/m2).
As the value is incremented by 1, the control temperature is
increased by 5 deg C from the specified value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use case When offset/fixing failure occurs on recycled paper 2
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image
failure occurs when setting an extreme value.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
TMP-TB11 Fixing control temperature: Rcycl ppr 1
Lv.1 Details To set the offset of fixing control temperature for recycled paper 1(64
to 75 g/m2).
As the value is incremented by 1, the control temperature is
increased by 5 deg C from the specified value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
Use case When offset/fixing failure occurs on recycled paper 1
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to change the value a little at a time. Otherwise, offset/image
failure occurs when setting an extreme value.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
8-140
8-140