Canon imageRUNNER ADVANCE C350 series Service Manual page 292

2
Technical Explanation > DCM > DCM > Import/Export by Service Mode (Internal)
5. Select [SELECT].
Enter the selection number displayed on the left side of the file to be selected and press [OK].
" *" is displayed on the right side of the file to indicate that the file has been selected.
6. When the correct file is displayed, press [->].
2 Technical Explanation > DCM > DCM > Import/Export by Service Mode (Internal)
7. Select [PASSWD], enter a password from the software keyboard, and then press [OK].
F-2-454
Note:
•
•
F-2-455
Click here
"<-" is displayed on the right side of the file to indicate that the selection of the file has
been confirmed.
"***" is displayed after the password is entered.
2-249
F-2-456
F-2-457
2-249