Canon imageRUNNER ADVANCE C350 series Service Manual page 811

COPIER> DISPLAY> MISC
TNRB-IDC Display of C-color Toner Container ID
Lv.1 Details To display the ID of C-color Toner Container that is installed to the
machine
Use case When checking whether the barcode ID on the Toner Container is
read correctly
Adj/set/operate method N/A (Display only)
Display/adj/set range 12-digit decimal number
TNRB-IDK Display of Bk-color Toner Container ID
Lv.1 Details To display the ID of Bk-color Toner Container that is installed to the
machine
Use case When checking whether the barcode ID on the Toner Container is
read correctly
Adj/set/operate method N/A (Display only)
Display/adj/set range 12-digit decimal number
ENV-1TR Dspl of prmry trns ATVC ctrl environment
Lv.2 Details To display the environment (relative humidity) at execution of the
primary transfer ATVC control.
Use case When checking the environment where the primary transfer ATVC
control is executed
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 6
8
Service Mode > COPIER > DISPLAY > HT-C
T-8-11
8 Service Mode > COPIER > DISPLAY > HT-C
■ HT-C
COPIER> DISPLAY> HT-C
TGT-A-Y Dspl ARCDAT screen A Y-color target VL
Lv.2 Details To display the Y-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-A-M Dspl ARCDAT screen A M-color target VL
Lv.2 Details To display the M-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-A-C Dspl ARCDAT screen A C-color target VL
Lv.2 Details To display the C-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-A-K Dspl of ARCDAT screen A Bk-clr target VL
Lv.2 Details To display the Bk-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
8-41
8-41