Canon imageRUNNER ADVANCE C350 series Service Manual page 284

2
Technical Explanation > DCM > DCM > Import/Export by Service Mode (External)
■ Import/Export by Service Mode (External)
Import/export by service mode allows the selection between USB flash drive and internal
HDD for the save destination of DCM files.
The procedure of import/export when USB flash drive is selected is shown below.
The DCM files to be exported contain only the items of "Service Mode Settings"
The DCM files to be imported can have been exported either by service mode or by remote
UI.
● Export Procedure
Preparation
USB flash drive
* Required when exporting to USB flash drive.
It needs to have been formatted to be recognized by the device. No firmware
registration is necessary.
Overall flow
Here, a method to export to a USB flash drive is mentioned below.
(1) Select USB flash drive as save destination (LIST=1)
(2) Set the password
(3) Export to USB flash drive
(4) Remove USB flash drive
Procedure
1. Connect the USB flash drive and check that it has been mounted.
2 Technical Explanation > DCM > DCM > Import/Export by Service Mode (External)
2. Log in to service mode and press [BACKUP].
3. Select [LIST] after the screen moves to <BACKUP>.
4. When saving to USB flash drive, enter "1" and press [OK].
F-2-421
2-241
F-2-422
F-2-423
F-2-424
2-241