Canon imageRUNNER ADVANCE C350 series Service Manual page 899

COPIER> OPTION> FNC-SW
ASLPMAX Set auto sleep shift time maximum value
Lv.1 Details Set auto sleep shift time maximum value.
Use case Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: 4 hours, 1: 60 minutes
Default value JP:0, USA:0, EUR:1, AU:0, CN:0, KR:0, TW:0, ASIA:0
TNR-RS Set of Toner Container rotation speed
Lv.2 Details To set the rotation speed of Toner Container.
As the value is larger, the Toner Container rotates faster so enough
amount of toner is supplied for high duty (high image ratio) image,
but noise becomes louder.
Use case - When the rotation drive noise is loud
- When not enough amount of toner is supplied for high duty image
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -3 to 3
Unit 1
Default value 0
TNNEWQCK Set new Tonr Cntner chck seq aftr rplce
Lv.2 Details To set whether to execute the new Toner Container check sequence
after replacement.
In case of processing a large job immediately after replacement of
the Toner Container when 0 is set, downtime due to the new Toner
Container check sequence occurs during the processing.
When 1 is set, control to print the specified number of sheets
is turned OFF and the new Toner Container check sequence is
executed immediately after the replacement.
Use case When downtime occurs due to the new Toner Container check
sequence during the processing of a large job
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
R-DR-FAN Adj Right Door Unit Fan airflow amount
Lv.2 Details To set the rotation speed of the Right Door Unit Fan during printing.
When 2 is set, the heat exhaust efficiency is improved so it can
alleviate papers to be stuck together at the time of delivery. However,
the machine is more likely to shift to temperature rising prevention
mode.
Use case When delivered papers stick together frequently
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When 2 is set, the machine is more likely to shift to temperature
rising prevention mode.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
PWR-FAN Adj Power Supply Fan airflow amnt: stby
Lv.2 Details To adjust the airflow amount of the Power Supply Fan at standby.
As the value is larger, heat exhaust efficiency is improved, but noise
becomes louder.
Use case - When the machine is installed in a high temperature environment
in which damage of component parts of the Power Unit or HDD
damage is likely to occur
- When HDD damage occurs frequently
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Noise becomes louder.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
Supplement/memo The Power Supply Fan also cools the Controller PCB.
DLVY-FAN Adj Delivery Cooling Fan airflow amount
Lv.2 Details To set the rotation speed of the Delivery Cooling Fan during printing.
When 2 is set, the heat exhaust efficiency is improved so it can
alleviate papers to be stuck together at the time of delivery. However
stacking performance decreases.
Use case When delivered papers stick together frequently
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When 2 is set, stacking performance at the time of delivery
decreases.
Display/adj/set range 0 to 2
0: Automatic, 1: Half speed, 2: Full speed
Default value 0
8-129
8-129