Canon imageRUNNER ADVANCE C350 series Service Manual page 943

COPIER> OPTION> USER
JA-WEB Setting of Inbox document upload: SAM
Lv.2 Details To set the Inbox document upload with the Web browser at the time
of iW SAM.
When 1 is set uploading to the Inbox document with the Web
Browser is enabled.
Use case When the operation restriction is cleared at the time of iW SAM
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
EXP-CRYP Confdntial encrypt ON/OFF:add book exprt
Lv.1 Details To set whether to encrypt the confidential part (password part) in the
Address Book when exporting the address book and device settings
via RUI.
When 0 is set, the confidential part in the address book is exported
without encryption.
Use case When there is a need to export password without encryption because
of operation and tool
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure not to allow the user to execute export without encryption
because of security concern.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
SMD-EXPT Setting of export target data: remote UI
Lv.1 Details To set whether to export "service mode data" from remote UI.
When 1 is set, "service mode data" is displayed as the target data
of export on remote UI. When installing more than 1 machine at the
same time, the same service mode data can be registered.
Use case When installing more than 1 machine at the same time
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Supplement/memo If selecting "service mode data" as the target data of export on
remote UI after setting SMD-EXPT to 1, service mode data can be
exported.
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
SNDSTREN Set of setting delete aftr scan and send
Lv.1 Details To set whether to delete the transmission settings except for the
address after transmission from the "Scan and Send" screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Delete, 1: Retain
Default value JP:1, USA:0, EUR:0, AU:0, CN:0, KR:0, TW:0, ASIA:0
FAXSTREN Set of setting delete aftr fax transmit
Lv.1 Details To set whether to delete the transmission settings except for the
address after transmission from the "Fax" screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Delete, 1: Retain
Default value JP:1, USA:0, EUR:0, AU:0, CN:0, KR:0, TW:0, ASIA:0
PRTDP-SW Set delivery side for 1-page job:2-sided
Lv.1 Details To set whether to deliver paper face-up or face-down when printing
only 1 page although 2-sided print is set.
When 0 is set, paper is delivered face-down like 1-sided job. (Paper
does not pass through the Duplex Path.)
When 1 is set, paper is delivered face-up via the Duplex Path.
Distance of paper feeding becomes longer so productivity is
decreased.
Use case When changing the delivery side of 1-page print although 2-sided
print is set
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Face-down delivery, 1: Face-up delivery
Default value 0
8-173
T-8-51
8-173