19)
Connect the connector of the Card Reader Relay Harness to the host machine, and
install the Connector Cover.
• 1 Screw (TP; M3x6)
NOTE:
To ensure that the connector does not become disconnected, be sure to place the tie-
wrap of the Card Reader External Relay Harness on the inside of the Connector Cover.
1x
TP
M3x6
9
Installation > Copy Card Reader-F1 > Installation Procedure
20)
21)
F-9-56
1x
F-9-57
9
Installation > Copy Card Reader-F1 > Installation Procedure
Remove the covers of the 2 Cord Guides.
Remove the release paper from the Cord Guides, and affix the guides to the areas
indicated in the figure.
9-23
F-9-58
F-9-59
9-23