Canon imageRUNNER ADVANCE C350 series Service Manual page 855

COPIER> ADJUST> COLOR
HD-OFS-K Color balance adj of Bk high dens area
Lv.2 Details To adjust the color balance of the high density area of Bk.
As the greater value is set, the image gets darker.
This setting is linked with Settings/Registration> Adjustment/
Maintenance> Adjust Image Quality> Color Balance.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this when the machine is operating correctly.
- Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range -8 to 8
Default value 0
Related UI menu Adjustment/Maintenance> Adjust Image Quality> Color Balance
PL-OFS-Y Clr blnce adj of Y low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of Y at PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PL-OFS-M Clr blnce adj of M low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of M at PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PL-OFS-C Clr blnce adj of C low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of C at PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
8
Service Mode > COPIER > ADJUST > COLOR
8 Service Mode > COPIER > ADJUST > COLOR
COPIER> ADJUST> COLOR
PL-OFS-K Clr blnce adj of Bk low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of Bk at PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this when the machine is operating correctly.
- Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range -8 to 8
Default value 0
PM-OFS-Y Clr blnce adj of Y mid dens area:PDL
Lv.2 Details To adjust the color balance of the intermediate density area of Y at
PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PM-OFS-M Clr blnce adj of M mid dens area:PDL
Lv.2 Details To adjust the color balance of the intermediate density area of M at
PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PM-OFS-C Clr blnce adj of C mid dens area:PDL
Lv.2 Details To adjust the color balance of the intermediate density area of C at
PDL print.
As the greater value is set, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
8-85
8-85