Canon imageRUNNER ADVANCE C350 series Service Manual page 428

4
Disassembly/Assembly > Image Formation System > Removing the Registration Patch Sensor Unit > Procedure
1) Remove the Registration Patch Sensor Unit [1].
• 1 Claw [2]
• 4 Shafts [3]
• 1 Connector [4]
• Harness Guide [A]
[3]
[1]
[3]
1x
[2]
4 Disassembly/Assembly > Image Formation System > Removing the Registration Patch Sensor Unit > Procedure
1x
1x
[4] [A]
F-4-301
NOTE: How to install the Registration Patch Sensor Unit
1) When assembling, be sure to hook the protrusion [A] of the Registration Patch
Sensor Unit over the 2 springs [1] to install the unit.
[A]
[1]
2) Hook the claw [2] on the hole [B] of the Registration Patch Sensor Unit.
1x
[B] [2]
4-121
[1]
[A]
F-4-302
F-4-303
4-121