8) Remove the 4 screws. (The removed screws will not be used.)
9) Connect the 4 PCB Spacers.
NOTE:
Be sure to connect the PCB spacers to improve work efficiency.
9
Installation > Document Scan Lock Kit-B1 > Installation Procedure
3x
F-9-10
3x
F-9-11
9
Installation > Document Scan Lock Kit-B1 > Installation Procedure
10)
Install the 4 PCB Spacers as shown in the figure.
NOTE:
•
Be sure to install the PCB Spacers in the order of 1 to 4.
•
Hold the first PCB Spacer with your fingers and remove the second and subsequent PCB
Spacers.
11)
Use a flat-blade screwdriver, etc. to fully tighten the 4 PCB Spacers.
4x
9-6
1x
F-9-12
F-9-13
9-6