Canon imageRUNNER ADVANCE C350 series Service Manual page 492

5
Adjustment > Document Exposure System > When clearing the Reader-related RAM data of the Main Controller PCB.
When clearing the Reader-related RAM data of the
Main Controller PCB.
Points to note before replacing the Reader Controller PCB:
• Be sure to output the latest P-PRINT.
(Lv.1) COPIER > FUNCTION > MISC-P > P-PRINT
• Back up the service mode setting values related to Main Controller PCB. (Excluding
the case where service mode cannot be executed due to the Main Controller PCB
not operating normally)
(Lv.2) COPIER > FUNCTION > SYSTEM > RSRAMBUP
1) Using SST, download the newest system software (R-CON).:
2) Perform RAM clear.
Lv. COPIER > FUNCTION > CLEAR >
1
3) Turn OFF/ON the main power switch.
When backup is performed normally
4) Restore the backup data.
Lv. COPIER > FUNCTION > SYSTEM >
2
NOTE:
Work is completed when backup was normally performed.
5 Adjustment > Document Exposure System > When clearing the Reader-related RAM data of the Main Controller PCB.
R-CON
T-5-3
RSRAMRES
T-5-4
When backup is not performed normally
5) Enter the values written on the service label (on the back of the Front Cover).
Lv. COPIER > ADJUST > ADJ-XY >
1 ADJ-X ADJ-Y
Lv. COPIER > ADJUST > CCD >
W-PLT-X W-PLT-Y
50-RG 50-GB
50DF-RG 50DF-GB
MTF2-M1 MTF2-M6
MTF2-M2 MTF2-M7
MTF2-M3 MTF2-M8
1 MTF2-M4 MTF2-M9
MTF2-M5 -
MTF-M1 MTF-M6
MTF-M2 MTF-M7
MTF-M3 MTF-M8
MTF-M4 MTF-M9
MTF-M5 -
Lv. COPIER > ADJUST > PASCAL >
1 OFST-P-Y OFST-P-M
Lv. FEEDER > ADJUST >
1 DOCST LA-SPEED
6) Make an output of P-PRINT.
Lv. COPIER > FUNCTION > MISC-P >
1
Store the outputted P-PRINT into the service book.
ADJ-X-MG ADJ-Y-DF
T-5-5
W-PLT-Z -
100-RG 100-GB
100DF-RG 100DF-GB
MTF2-S1 MTF2-S6
MTF2-S2 MTF2-S7
MTF2-S3 MTF2-S8
MTF2-S4 MTF2-S9
MTF2-S5 -
MTF-S1 MTF-S6
MTF-S2 MTF-S7
MTF-S3 MTF-S8
MTF-S4 MTF-S9
MTF-S5 -
T-5-6
OFST-P-C OFST-P-K
T-5-7
DOCST2 LASPD2 DOCSTDUP
T-5-8
P-PRINT
T-5-9
5-3
5-3