Canon imageRUNNER ADVANCE C350 series Service Manual page 922

COPIER> OPTION> CLEANING
DR-CL-L Set toner band length: Drum Clean Blade
Lv.2 Details To set the length of toner band for preventing flipping of the Drum
Cleaning Blade.
Increase the value when noise comes from the Photosensitive Drum
due to the flipping. If the length of toner band gets longer, flipping
can be prevented, but toner consumption is increased.
When 0 is set, toner band is not formed.
Use case - When noise comes from the Photosensitive Drum
- When low productivity or high toner consumption is pointed out by
the user
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range 0 to 100
0: OFF, 1: 1 mm, 2: 2 mm, ..., 100: 100 mm
Unit 1 mm
Default value 10
DR-CL-T Set toner band form intvl:Drum Cln Blade
Lv.2 Details To set the interval to form toner band for preventing flipping of the
Drum Cleaning Blade.
Decrease the value when noise comes from the Photosensitive Drum
due to the flipping. If the interval to form toner band is decreased,
flipping can be prevented, but toner consumption is increased.
Use case - When noise comes from the Photosensitive Drum
- When low productivity or high toner consumption is pointed out by
the user
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -3 to 5
Unit 10000 mm
Default value 0
ITB-CL-L Set toner band length: ITB Clean Blade
Lv.2 Details To set the length of toner band for preventing flipping of the ITB
Cleaning Blade.
Increase the value when noise comes from the ITB due to the
flipping. If the length of toner band gets longer, flipping can be
prevented, but toner consumption is increased.
When 0 is set, toner band is not formed.
Use case - When noise comes from the ITB
- When low productivity or high toner consumption is pointed out by
the user
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range 0 to 100
0: OFF, 1: 1 mm, 2: 2 mm, ..., 100: 100 mm
Unit 1 mm
Default value 10
8
Service Mode > COPIER > OPTION > CLEANING
8 Service Mode > COPIER > OPTION > CLEANING
COPIER> OPTION> CLEANING
ITB-CL-T Set toner band form intvl: ITB Cln Blade
Lv.2 Details To set the interval to form toner band for preventing flipping of the
ITB Cleaning Blade.
Decrease the value when noise comes from the ITB due to the
flipping. If the interval to form toner band is decreased, flipping can
be prevented, but toner consumption is increased.
Use case - When noise comes from the ITB
- When low productivity or high toner consumption is pointed out by
the user
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -3 to 5
Unit 10000 mm
Default value 0
8-152
T-8-46
8-152