Canon imageRUNNER ADVANCE C350 series Service Manual page 918

COPIER> OPTION> IMG-MCON
TNR-DWN Setting of toner deposit amount
Lv.2 Details To set the toner deposit amount on the gradation area and text area.
By reducing the toner deposit amount when toner scatters or paper
winds around the Fixing Assembly in the case of full color, the
symptom can be decreased, but the hue might change.
Use case When a full color image is blurred due to toner scattering, etc.
When paper winds around the Fixing Assembly
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Hue might change depending on the setting.
Display/adj/set range 0 to 5
0: Gradation area 200 %, Text area 180 % (Normal)
1: 180 %, 165 %
2: 140 %, 130 %
3: 160 %, 150 % (Normal 1, Recycle 1 paper, Thin paper)
4: 160 %, 150 %
5: 160 %, 150 % (Transparency only)
Default value 0
Related UI menu Adjustment/Maintenance> Adjust Image Quality> Adjust Toner
Amount at Color Printing
TMIC-BK ON/OFF of TMIC Bk_LUT end edge correct
Lv.2 Details To set ON/OFF of the trailing edge adjustment of Bk_LUT for PDL
and for copy which are used by TMIC.
When the trailing edge adjustment is set to ON, the density of the
high density area becomes high, and consequently text and thin
lines become clear. While an image becomes clear, the hue of the
gradation area of photos, etc. is changed.
Use case When thin lines are partly missing or characters are faded
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: ON for PDL, OFF for copy
1: OFF for PDL, OFF for copy
2: ON for PDL, ON for copy
3: OFF for PDL, ON for copy
Default value 0
DH-MODE Set ptch data at Dhalf except full crrct
Lv.2 Details To set whether to use the high-density patch data that has been
scanned by D-half control of full correction at the time of D-half
control other than full correction.
Use case At image adjustment
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Used, 1: Not used
Default value 0
8
Service Mode > COPIER > OPTION > IMG-MCON
8 Service Mode > COPIER > OPTION > IMG-MCON
COPIER> OPTION> IMG-MCON
REDU-CNT Set toner deposit amount limt at clr adj
Lv.2 Details To set whether to limit the toner deposit amount at color adjustment
(color balance, fine adjustment of density).
When 0 is set, the color adjustment value is reflected to an image
precisely, but toner scattering in the Transfer Assembly and Fixing
Assembly might occur, and paper might wind around the Fixing
Assembly.
Use case - Upon user's request
- When reflecting the color adjustment value to an image precisely
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 0 is set, toner scattering in the Transfer Assembly and Fixing
Assembly might occur, and paper might wind around the Fixing
Assembly.
Display/adj/set range 0 to 1
0: Toner deposit amount is not limited.
1: Toner deposit amount is limited to the specified amount.
Default value 1
VP-ART Setting of line art processing
Lv.2 Details To make a setting for outline processing for line art on scalable PDF.
In the outline processing, a binary image outline is extracted in the
field which is recognized as line art, and is converted into vector
data.
Specify whether to convert the binary image outline into vector data
or to recognize it as one line (as a thin line). For the thin line, the line
width can be specified.
Change this value when you want to obtain an output of a wide-width
line as one line rather than as an outline (when you want to prioritize
edit operation as a line rather than image quality).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 99
Default value 1
8-148
8-148