Settings On The Device Side - Canon imageRUNNER ADVANCE C350 series Service Manual

2
Technical Explanation > MEAP > Preparation for Using SMS > Settings on the Device Side
● PC and Browser Settings
The PC and browser used to access SMS need to satisfy the following conditions.
• The supported browser language should be the same with the language of the OS.
• Java Script should be enabled.
• The supported screen size should be 800 x 600 or larger (recommended size: 1024 x 768).
• Session cookie should be enabled.
• Only alphanumeric characters and some of the symbols ("-" or ".") should be used as the
machine domain name and host name.
• If an invalid character string such as a low line ("_") is included in the host name, cookies
cannot be enabled.

■ Settings on the Device Side

● Network configuration process
In order to provide support for the machine via network such as SMS, the network settings
need to be made from the touch panel of the machine. (this setting is [ON] by default).
1) Press [Settings/Registration], select [Preferences] > [Network] > [TCP/IP Settings] > [Use
HTTP] and press [On].
2 Technical Explanation > MEAP > Preparation for Using SMS > Settings on the Device Side
Note:
In iR-ADV series, the System Manager ID and the System PIN are configured by
default, so "Network" and the items that follow are grayed out and cannot be selected.
Return to the top screen, press [Login] at the lower left of the screen, login as the
system manager, and configure the settings.
The default setting for the System Manager ID is "7654321", and the password is"
7654321".
Note:
When using SSL, press [Settings/ Registration], select [Management Settings]>[License
/ Other] > [MEAP Settings] > [SSL Settings] and press [On]. (This setting is applied to
SSL setting on RUI. Vice versa, [On] set for SSL on RUI is also applied to the touch
panel.)
When [Use SSL] is set to On, the message dialog, [The Default Key is not set. Check
the Key and Certificate List settings in Certificate Setting.], is shown. Press [OK] for this
message.
2) Press [OK] to return to Main Menu screen.
3) Restart this device.
F-2-156
2-128
F-2-157
F-2-158
2-128