■ Backup/ Restore
● [5]: Backup/Restore
Backup/Restoration of the data in the FLASH can be executed.
It is used to temporarily save the data stored in the FLASH to the HDD and to restore it after
replacement.
Operation Procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press the key on the control panel.
[5] - [1] - [0]: Execute backup/ any key other than [0]: Return to the menu screen
6
Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Other menus
F-6-66
6
Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Other menus
The following message is displayed when the backup process is completed.
4) The restoration process follows the same procedure as the backup procedure.
NOTE:
If there is no advance data backup, restoration is not available.
■ Other menus
● [6]: Other Menu
This item is not used
● [8]: Download File
6-44
F-6-67
6-44