Canon imageRUNNER ADVANCE C350 series Service Manual page 204

2
Technical Explanation > MEAP > Enhanced System Application Management > Steps to Change Login Services
■ Steps to Change Login Services
1) Click [Enhanced System Application Management] on [System Management].
2) A page will appear showing the various selections you can make for the login service. Click
[SWITCH] for the login service to be used.
2 Technical Explanation > MEAP > Enhanced System Application Management > Steps to Change Login Services
3) When login service application you have selected turns to Start after Restart, restart the
device.
F-2-246
CAUTION:
In case that the login method to a device is set to SSO-H, if you log in SMS with RLS
authentication, no selection is displayed although it is the screen to change the login
method.
F-2-247
This is the specification to prevent the inconsistent setting which enables to stop SMS
Installer Service (Password Authentication) by changing the login method to Default
Authentication.
When you want to change the login method to a device, log in the SMS with the
password authentication.
2-161
F-2-248
F-2-249
2-161