Canon imageRUNNER ADVANCE C350 series Service Manual page 998

11) Remove the Lower Cover of the Card Reader Unit, and change the position of the
cable.
• 1 Screw (Removed screws will be used in step 12)
12) Install the Lower Cover of the Card Reader Unit.
• 1 Screw (Use the screws removed in step 11)
1x
13) Remove the short connector from the connector of the Card Reader Unit. (Removed
short connector will not be used.)
9
Installation > Copy Card Reader-F1 > Installation Procedure
14)
• 2 Bosses
• 1 Toothed Washer
• 1 Screw(RS Tightening; M4x10)
• 1 Wire Saddle
1x
F-9-49
F-9-50
9 Installation > Copy Card Reader-F1 > Installation Procedure
Install the Card Reader Unit to the Card Reader Mounting Plate (Front) Unit.
1x
Boss
RS tight
M4x10
9-21
1x
F-9-51
9-21