Canon imageRUNNER ADVANCE C350 series Service Manual page 935

COPIER> OPTION> USER
CNT-SW Set default dspl items on charge counter
Lv.1 Details To set default display items of the charge counter on the Counter
Check screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0:
Counter 1 - Total 1: 101
Counter 2 - Total (Black 1): 108
Counter 3 - Copy (Full Color + Single Color/1): 232
Counter 4 - Print (Full Color + Single Color/1): 324
1:
Counter 1 - Total 2: 102
Counter 2 - Copy (Full Color + Single Color/2): 231
Counter 3 - Total A (Full Color + Single Color/2): 148
Counter 4 - Copy (Black 2): 222
Counter 5 - Total A (Black 2): 133
Default value 0
Related service mode COPIER> OPTION> FNC-SW> CONFIG
PRJOB-CP Set count TX at RX/report print
Lv.2 Details To set to enable/disable a page-basis count pulse transmission to the
charging management device at the time of reception print or report
print.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No transmission, 1: Transmission
Default value 0
Supplement/memo Charge management device: Coin Manager, Non-Canon-made
control card
DFLT-CPY Setting of color mode for copy
Lv.1 Details To set the default color mode for copy operation.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Execute COPIER> FUNCTION> CLEAR> JV-CACHE.
3) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Based on Auto/ACS/Printer Driver settings, 1: Color mode, 2: B/W
mode
Default value JP:0, USA:0, EUR:2, AU:0, CN:0, KR:0, TW:0, ASIA:0
Related UI menu Function Settings> Copy> Select Color Settings for Copy> Use Auto
(Color/Black)
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER> OPTION> USER
DPT-ID-7 Password entry set at dept ID reg/auth
Lv.2 Details To set whether to require a password entry at the time of registration/
authentication of department ID.
With the setting to require entry, entry of 7-digit password is required
as well as entry of department ID.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Department ID only, 1: 7-digit (password) entry
Default value 0
RUI-RJT Connct set at invalid auth from remoteUI
Lv.2 Details To set to disconnect HTTP port when the machine receives invalid
authentication from remote UI 3 times.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Continued connection, 1: Disconnected
Default value 0
FREG-SW Dspl/hide of MEAP counter free rgst area
Lv.2 Details To set whether to display or hide the free register area of MEAP
counter for SEND
Use case At trouble analysis
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this at the normal service.
- Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Supplement/memo Individual count-up (counter advance) of MEAP application is
available in the free register area of MEAP counter.
8-165
8-165