Copy Card Reader Attachment-B; Copy Card Reader-F - Canon imageRUNNER ADVANCE C350 series Service Manual

Copy Card Reader-F1

Points to Note at Installation
• To install the Copy Card Reader-F1, the Copy Card Reader Attachment Kit-B4 is required.
• When installing at the same time with the Image Analysis Board, be sure to install this
Image Analysis Board first.
• The following options cannot be used in combination with this equipment.
• Serial Interface Kit
• Copy Control Interface Kit
Check Items when Turning OFF the Main Power
Check that the power of the host machine is OFF.
1) Turn OFF the main power switch.
2) Check that display in the Control Panel and the lamp of the main power are turned off, then
disconnect the power plug.
Checking the Contents
■ Copy Card Reader-F1
[1] Card Reader Unit X 1 [2] Screw
(RS tight; M4x10) X 1
9
Installation > Copy Card Reader-F1 > Checking the Contents > Copy Card Reader Attachment-B4

■ Copy Card Reader Attachment-B4

[3] Toothed washer X 1
F-9-36
9 Installation > Copy Card Reader-F1 > Checking the Contents > Copy Card Reader Attachment-B4
[1] Card Reader Mounting [2] Card Reader Mounting
Plate (front) Unit X 1 Plate (rear) Unit X 1
[4] Card Reader [5] Connector Cover X 1
Relay Unit X 1
[7] Screw
[8] Screw (TP; M3x6) X 5
(W Sams; M3x14) X 2
[10] Connector Cover X 1
[11] Wire Saddle X 1
[13] Screw [14] Screw
(TP; M4x12) X 2 (TP; M3x12) X 2
9-16
[3] Card reader External
Relay Harness X 1
[6] Cord Guide X 2
[9] Card Reader Mounting
Plate (lower) Unit X
[12] PCB Spacer X 1
[15] Screw
(Binding; M4x6) X 4
F-9-37
9-16