Canon imageRUNNER ADVANCE C350 series Service Manual page 954

COPIER> OPTION> LCNS-TR
ST-LIPS4 Install state display of LIPS4 func: JP
Lv.2 Details To display installation state of LIPS4 function (JP only) when
disabling the function with license transfer.
Use case When checking whether LIPS4 function (JP only) is installed
Adj/set/operate method 1) Select ST-LIPS4.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-LIPS4.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-LIPS4 Trns license key dspl of LIPS4 func: JP
Lv.2 Details To display transfer license key to use LIPS4 function (JP only) when
the function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-LIPS4.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LIPS4.
Display/adj/set range 24 digits
ST-PSPCL Install state dspl of PS/PCL function
Lv.2 Details To display installation state of PS/PCL function when disabling the
function with license transfer.
Use case When checking whether PS/PCL function is installed
Adj/set/operate method 1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSPCL.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-PSPCL Transfer license key dspl of PS/PCL func
Lv.2 Details To display transfer license key to use PS/PCL function when the
function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSPCL.
Display/adj/set range 24 digits
8
Service Mode > COPIER > OPTION > LCNS-TR
8 Service Mode > COPIER > OPTION > LCNS-TR
COPIER> OPTION> LCNS-TR
ST-PCLUF Install state dspl: PCL/UFR II function
Lv.2 Details To display installation state of PCL/UFR II function when disabling
the function with license transfer.
Use case When checking whether PCL/UFR II function is installed
Adj/set/operate method 1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PCLUF.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-PCLUF Trns license key dspl of PCL/UFR II func
Lv.2 Details To display transfer license key to use PCL/UFR II function when the
function is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PCLUF.
Display/adj/set range 24 digits
ST-PSLIP Installation state dspl of PS function
Lv.2 Details To display installation state of PS function when disabling the
function with license transfer.
Use case When checking whether PS function is installed
Adj/set/operate method 1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSLIP.
Display/adj/set range When operation finished normally: OK!
Default value According to the setting at shipment
TR-PSLIP Transfer license key dspl of PS function
Lv.2 Details To display transfer license key to use PS function when the function
is disabled with license transfer.
Use case - When replacing the HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSLIP.
Display/adj/set range 24 digits
8-184
8-184