Downloading The System Software; Downloading Procedure - Canon i-SENSYS LBP5300 Series Service Manual

Chapter 5
Memo:
The New Hardware Wizard appears on the PC screen. Click [Cancel].
Found New Hardware Wizard
4) Start up the SST.

5.4.3 Downloading the System Software

5.4.3.1 Downloading Procedure

/ i-SENSYS LBP5360
Point to Note When Downloading
There are 2 types of firmware: for Plain (LBP5360) and for hard disk (LBP5360H).
If downloading the firmware for hard disk (LBP5360H) to the machine without hard disk or downloading the firmware for Plain (LBP5360) to the machine with
hard disk, 'E744-1000' is displayed on the control panel when the transfer from SST is completed. In addition, if downloading a firmware for other product, the
same error code is displayed.
In such case, turn OFF/ON the machine, and perform download with correct firmware.
1) Select the model to connect. (LBP5360, 5360HÅj
5-16
[2]
[1]
Welcome to the Found New
Hardware Wizard
This Wizard helps you indtall a device driver for a
hardware device.
To continue, click Next.
[4]
F-5-13
< Back Next >
F-5-14
[5]
[3]
Cancel
0014-7544