Canon imageRUNNER ADVANCE C350 series Service Manual page 878

COPIER> FUNCTION> INSTALL
COM-LOG Dspl connect error w/ Sales Co's server
Lv.1 Details To display error information when the connection with the sales
company's server failed.
Use case When using Embedded-RDS
Adj/set/operate method N/A (Display only)
Caution Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range Year, date, time, error code, error detail information (maximum 128
characters)
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST,
RGW-ADR
COPIER> FUNCTION> CLEAR>ERDS-DAT
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
RGW-ADR URL setting of Sales Company's server
Lv.1 Details To set the URL of the sales company's server to be used for
Embedded-RDS.
Use case When using Embedded-RDS
Adj/set/operate method 1) Select the URL.
2) Enter the URL, and then press OK key.
3) Turn OFF/ON the main power switch.
Caution - Do not use Shift-JIS character strings.
- Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range URL
Default value https://a01.ugwdevice.net/ugw/agentif010
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST,
COM-LOG
COPIER> FUNCTION> CLEAR> ERDS-DAT
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
CNT-DATE Set counter send start date to SC server
Lv.1 Details To set the year, month, date, hour and minute to send counter
information to the sales company's server.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case When the Embedded-RDS third-party expanded function is available
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range YYYYMMDDHHMM (12 digits)
YYYY: Year, MM: Month, DD: Date, HH: Hour, MM: Minute
Default value 000000000000
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
8
Service Mode > COPIER > FUNCTION > INSTALL
8 Service Mode > COPIER > FUNCTION > INSTALL
COPIER> FUNCTION> INSTALL
CNT-INTV Set counter send interval to SC server
Lv.1 Details To set the interval of sending counter information to the sales
company's server in a unit of one hour.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case - When restarting the potential control after executing COPIER>
OPTION> IMG-FIX> PO-CNT.
- When D-max control conditions are changed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 168 (= 1 week)
Unit 1 hour
Default value 24
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
BRWS-ACT ON/OFF of service browser
Lv.1 Details To set ON/OFF of service browser.
ON/OFF of service browser switches whenever the main power
switch is turned OFF/ON after execution.
If connection with the UGW server is successful, "OK!" is displayed.
If "NG!" is displayed, execute a communication test using COM-
TEST.
The setting is enabled after reboot. Whether the service browser is
ON or OFF can be checked in COPIER> DISPLAY> USER> BRWS-
STS (1: ON, 2: OFF).
Use case - When using the service browser
- At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After execution, turn OFF/ON the main power switch. After reboot,
be sure to check the usage status in COPIER> DISPLAY> USER>
BRWS-STS.
Display/adj/set range At normal termination: OK!, At abnormal termination: NG!
Related service mode COPIER> FUNCTION> INSTALL> COM-TEST
COPIER> DISPLAY> USER> BRWS-STS
CDS-CTL Set country/area when using CDS
Lv.1 Details To set the country/area to enable the CDS.
Use case When enabling CDS
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range CA (Canada), LA (Latin America), HK (Hong Kong) and the country/
area specified in COPIER> OPTION> FNC-SW> CONFIG.
Default value Equivalent to COPIER> OPTION> FNC-SW> CONFIG
Related service mode COPIER> OPTION> FNC-SW> CONFIG
Supplement/memo CDS: Contents Delivery System
8-108
8-108