Canon imageRUNNER ADVANCE C350 series Service Manual page 894

COPIER> OPTION> FNC-SW
MIBCOUNT Scope range set of Charge Counter MIB
Lv.2 Details To set the range of counter information that can be obtained as MIB
(Management Information Base).
Use case For customization
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: All charge counters are obtained, 1: Only displayed counter* is
obtained, 2: All charge counters are not obtained
* : Counter specified by the following: COPIER> OPTION> USER>
COUNTER 1 to 6
Default value 0
Related service mode COPIER> OPTION> USER> COUNTER1- 6
CNTR-SW Init parts counter estimated life value
Lv.1 Details To return the estimated life value of parts counter to the initial value.
Use case Upon user's request
Adj/set/operate method 1) Enter 0, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0: Returned to the initial value
Default value 0
PSWD-SW Password type set to enter service mode
Lv.1 Details To set the type of password that is required to enter when getting into
service mode.
2 types are available: one for "service technician" and the other for
"system administrator + service technician".
When selecting the type for "system administrator + service
technician", enter the password for service technician after the
password entry by the user's system administrator.
Use case Upon request from the user who concerns security
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: No password, 1: Service technician, 2: System administrator +
service technician
Default value 0
SM-PSWD Password setting for service technician
Lv.2 Details To set password for service technician that is used when getting into
service mode.
Use case When password is required to get into service mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to select 1 or 2 with PSWD-SW in advance.
Display/adj/set range 1 to 99999999
Default value 11111111
Related service mode COPIER> OPTION> FNC-SW> PSWD-SW
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
RPT2SIDE Set of report 1-sided/2-sided output
Lv.1 Details To set whether to use 1-sided or 2-sided for report output of service
mode.
Use case When making 2-sided report output to reduce the number of output
pages
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 1-sided, 1: 2-sided
Default value 1
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
BRWS-FAV Set of service browser favorite register
Lv.2 Details To set whether to allow registration of favorites in the browser for
service.
When 1 is set, favorites in the browser for service can be edited, and
any URLs can be accessed.
Use case When service technicians edit favorites in the browser for service
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
INVALPDL Disable of PDL license
Lv.1 Details To disable the registered PDL license.
When "1: Disabled" is set, PDL is disabled even if a PDL license
is registered. This is set to the machines installed at convenience
stores, which do not allow PDL to be used.
Use case When prohibiting the use of PDL
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Registered PDL license is enabled, 1: Disabled
Default value 0
IMGCNTPR Setting of image quality mode
Lv.1 Details To set the image quality mode.
The counter priority mode is applied when 1 is set, and the image
quality priority mode is applied when 0 is set.
Use case Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Image quality priority mode, 1: Counter priority mode
Default value 1
8-124
8-124