Canon imageRUNNER ADVANCE C350 series Service Manual page 210

2
Technical Explanation > MEAP > Setting the method to login to SMS > Outline
● Setting for login by RLS Authentication
The procedures for changing the RLS authentication Start/ Stop settings are as follows.
1) Access the SMS login screen using the normal method (password authentication). The
URL is shown below.
URL: https://<IP address of MEAP device>:8443/sms/rls/
Ex.) https://172.16.188.240:8443/sms/rls
2) Enter the password in the password entry field, and click the [Log In]. The default password
is "MeapSmsLogin". (Case sensitive)
Login screen by Password Authentication
3) Select [System Application Management] on System Management menu.
2 Technical Explanation > MEAP > Setting the method to login to SMS > Outline
4) Click on [Start] or [Stop] shown on Status field of SMS Installer Service (Remote Login
Service Authentication) to check if the status is changed.
5) Log out and then log in again and access via the RLS authentication login window.
When RLS authentication is set to [Start], another RLS login screen is firstly shown. When
accessing to RLS status screen with the setting of [Stop], the user will be redirected to the
password authentication screen.
RLS authentication started screen and RLS authentication stopped screen
F-2-265
F-2-266
2-167
F-2-267
F-2-268
2-167