Canon imageRUNNER ADVANCE C350 series Service Manual page 904

COPIER> OPTION> DSPLY-SW
UI-NAVI Display/hide of Tutorial
Lv.2 Details To set whether to display or hide "Introduction to Useful Features" in
the main menu.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
ITB-DSP ON/OFF of init after ITB rplce: Set/Reg
Lv.1 Details To set whether to display "ITB" on Initialization screen after replacing
parts in Settings/Registration.
When allowing the user to replace the ITB, set 1.
Use case When allowing the user to replace the ITB
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related UI menu Adjustment/Maintenance> Maintenance> Initialize After Replacing
Parts> ITB
FXU-DSP ON/OFF init after Fx Ass'y rplce:Set/Reg
Lv.1 Details To set whether to display "Fixing Unit" on Initialization screen after
replacing parts in Settings/Registration.
When allowing the user to replace the Fixing Assembly, set 1.
Use case When allowing the user to replace the Fixing Assembly
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related UI menu Adjustment/Maintenance> Maintenance> Initialize After Replacing
Parts> Fixing Unit
UI-CUSTM ON/OFF of custom menu screen display
Lv.2 Details To set ON/OFF of the Quick Menu screen.
Use case When not displaying the Quick Menu screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
8
Service Mode > COPIER > OPTION > DSPLY-SW
8 Service Mode > COPIER > OPTION > DSPLY-SW
COPIER> OPTION> DSPLY-SW
CLN-SEL Set of condensation prev main unit clean
Lv.1 Details To set the effect of cleaning inside the main unit for condensation
prevention.
When 0 is set, cleaning inside the main unit is not executed.
When 1 to 3 is set, an item for condensation prevention is displayed
in Settings/Registration, and the level of effect of cleaning inside the
main unit can be set.
As the value is larger, the effect is increased because ITB cleaning is
executed more frequently, but toner consumption and cleaning time
are increased.
In the case of installation in a low temperature and high humidity
environment (in winter), ask for the user's opinion and configure the
setting.
Use case When condensation occurs in a low temperature and high humidity
environment
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 3
0: OFF
1: ON (small effect, low toner consumption)
2: ON (moderate effect, moderate toner consumption)
3: ON (large effect, high toner consumption)
Default value 0
USER-DSP Display/hide of SSO-H login user name
Lv.1 Details To set whether to display the name of the user who logs in using
MEAP authentication (SSO-H) on the screen of the Control Panel
(upper left area).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Hide, 1: Display "display name", 2: Display "user name"
Default value 0
Supplement/memo MEAP authentication (SSO-H): local authentication and server
authentication using the Single Sign On-Hybrid MEAP application.
SDTM-DSP Display/hide of auto shutdown shift time
Lv.1 Details To set whether to display or hide "Auto Shutdown Time" in Settings/
Registration.
Use case When switching to display or hide auto shutdown time
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Be sure to set 0 for the model with fax for Europe. If 1 is set, fax
reception cannot be performed normally.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value JP:0, USA:0, EUR:1, AU:0, CN:0, KR:0, TW:0, ASIA:0
Related UI menu Preferences> Time/Energy Settings> AutoShutdown Time
8-134
8-134