Table of Contents
Advertisement
Duplex Unit Sensor/Switch Tests (Continued)
Test
Wait Sensor
Exit 2 Sensor/Switch Tests Menu
Test the Exit 2 sensors by manually toggling each sensor while viewing the results.
Exit 2 Sensor/Switch Tests
Test
Door E Interlock
Switch
Exit Sensor
Exit 2 Full Stack
Sensor
Exit Offset 2 Home
Position Sensor
Tray 4 & 5 Sensor/Switch Tests Menu
Tests the functionality of the sensors and switches located in Trays 4 and 5 by
displaying the current state while you manually toggle the selected device.
Tray 4 & 5 Sensor/Switch Tests
Test
Door C Interlock
Tray 4 Size Sensor
Tray 5 Size Sensor
Tray 4 No Paper
Sensor
Tray 5 No Paper
Sensor
Tray 4 Level Sensor
Reference
Action / Requirement
Displays "With Paper" or "Without Paper" when manually toggled.
Action / Requirement
Shows the status, "Open" or "Closed", when manually toggled.
Displays "With Paper" or "Without Paper" when manually toggled.
Displays the status of the Full Stack sensor on the Standard Output
Tray.
Displays the sensor status, "Home" or "Not Home" when toggled.
Action / Requirement
Displays the status, Open or Closed, of the Door C Interlock Switch.
Displays the size indicated by the guide position.
Displays the size indicated by the guide position.
Reports "Without Paper" in the resting position, and "With Paper"
when lifted. Test the sensor by removing all paper from the tray and
reinserting it. Another method is to reach into the tray cavity and
operate the actuator manually.
Reports "Without Paper" in the resting position, and "With Paper"
when lifted. Test the sensor by removing all paper from the tray and
reinserting it. Another method is to reach into the tray cavity and
operate the actuator manually.
Reports "Up" in the resting position, and "Down" when lifted. Test
the sensor by removing all but three or four sheets of paper from the
tray and reinserting it. Another method is to reach into the tray
cavity and operate the actuator manually.
A-17
Advertisement
Table of Contents
Troubleshooting
