Tray 2 And 3 Level Sensor - Fuji Xerox Phaser 5500 Service Manual

Tray 2 and 3 Level Sensor

1.
Remove the Tray 1/MPT Rear Cover (page 8-16).
2.
Remove the Tray 1/MPT Feeder (page 8-32).
3. Remove Door A (page 8-46).
4. Remove the Take Away Bracket (page 8-40).
5. Remove the Tray 2 Feeder (page 8-20) or Tray 3 Feeder (page 8-21).
6.
Remove the Level Sensor Actuator (page 8-25).
PL2.3.14
7. Release the hooks securing the Level Sensor to the Upper Frame as shown in the
figure.
8. Disconnect the connector from the Level Sensor and remove the sensor.
FRU Disassembly
Harness
Hook
Upper Frame
Feeder
Level Sensor
Hooks
s5500-110
8-27