Lower Transportation And Registration; Take Away Bracket - Fuji Xerox Phaser 5500 Service Manual

Lower Transportation and Registration

Take Away Bracket

1. Remove the Tray 1/MPT Rear Cover (page 8-16).
2.
Remove the Tray 1/MPT Feeder (page 8-32).
3.
Remove Door A (page 8-46).
4. Open Door B.
PL4.1.1
Take Away Bracket
5.
Remove the two screws securing the Take Away Bracket to the printer.
6. Disconnect the harness and release the harness from the clamp on the Take Away
Bracket.
7. Disconnect the Door B Interlock Switch from the harness and remove the Take
Away Bracket.
8-40
Door B
Phaser 5500 Printer Service Manual
s5500-139