Deletions (Line, Band, Spots) - Fuji Xerox Phaser 5500 Service Manual

Deletions (Line, Band, Spots)

Line, Band, or Spot Deletions
Line, Band or Spot Deletions Troubleshooting Procedure
Step
1 Inspect the test print for the presence of deletions
(missing image). There should be no deletions with a
diameter larger than 0.5 mm visible on test prints.
Are there deletions on the test prints?
2 Are there vertical (in process direction) Line/
Band deletions present?
3 Are there Horizontal (in direction of scanning)
Line/Band Deletions present?
4
Are there Spot Deletions present?
Note
The specified operating environment for the printer ranges from 41 degrees F
(5 degrees C) at 15% relative humidity to 95 degrees F (32 degrees C) at 85%
relative humidity. Fusing performance varies according to the environment.
Print-Quality Troubleshooting
Actions and Questions Yes No
Go to Step 2. Go to
"Fusing" on
page 5-6.
Go to Go to Step 3.
"Vertical
Deletions" on
page 5-21.
Go to Go to Step 4.
Horizontal
Deletions on
page 5-23.
Go to "Spot Go to
Deletions" on "Fusing" on
page 5-35. page 5-6.
s5500-048
5-5