Tray 2 And 3 No Paper Sensor - Fuji Xerox Phaser 5500 Service Manual

5. Remove the Tray 2 Feeder (page 8-20) or Tray 3 Feeder (page 8-21).
PL2.3.2
Feed/Lift Up
Motor
6.
Disconnect the connector from the Feed/Lift Motor.
7. Remove the two Phillips screws securing the Feed/Lift Motor to the Feeder.
8. Remove the Feed/Lift Motor.

Tray 2 and 3 No Paper Sensor

1.
Remove the Tray 1/MPT Rear Cover (page 8-16).
2. Remove the Tray 1/MPT Feeder (page 8-32).
3. Remove Door A (page 8-46).
4.
Remove the Take Away Bracket (page 8-40).
8-24
Feeder Assembly
Connector
Phaser 5500 Printer Service Manual
s5500-104