Fuji Xerox Phaser 5500 Service Manual page 364

Blank Print Troubleshooting Procedure (Continued)
Step Actions and Questions
12 Check image development.
1. Print a Test Print.
2. Turn off the power while printing.
3. Carefully remove the Drum
Cartridge and check the image
formed on the drum right before
the Transfer Roller.
Is the image completely formed
on the drum? Is it clear, black, and
easy to read?
13 Check image transfer.
Check the image formed on the
drum, right after the Transfer Roller.
Is the image completely
transferred on the paper?
14
Check the HVPS.
1. Replace the HVPS (page 8-86).
2. Print a Test Print.
Is the Test Print normal?
15 Check the Engine Logic Board.
1. Replace the Engine Logic Board
(page 8-89).
2. Print a Test Print.
Is the Test Print normal?
5-18
Yes
Go to Step 13.
Go to Step 14.
Problem solved.
Problem solved.
Phaser 5500 Printer Service Manual
No
Go to Step 14.
Go to Step 15.
Go to Step 15.
Replace the I/P Board
(page 8-91).