Fuji Xerox Phaser 5500 Service Manual page 40

Paper Sizes and Weights (Continued)
User-Selected Size
Auto-Sensed Size
Supported
Supported only when Long-Edge Feed
Depending on your region, finishers are
configured with either a 3-hole punch or a
2-hole and 4-hole punch.
These custom widths are supported with
stapling and hole punching: 210 mm (8.27
in.), 257 mm (10.12 in.), 297 mm (11.70
in.), 8.50 in. (216 mm), 10.50 in. (267 mm),
11.00 in. (279 mm).
Custom Width /
Custom Height
89–297 mm (3.50–11.70 in.)/
98–127 mm (3.87–5.00 in.)
89–297 mm (3.50–11.70 in.)/
127–182 mm (5.00–7.16 in.)
89–140 mm (3.50–5.50 in.)/
182–432 mm (7.16–17.00 in.)
140–182 mm (5.50–7.16 in.)/
182–432 mm (7.16–17.00 in.)
182–210 mm (7.16–8.27 in.)/
182–432 mm (7.16–17.00 in.)
210–297 mm (8.27–11.70 in.)
182–432 mm (7.16–17.00 in.)
Envelope Custom Width /
Envelope Custom Height
148–241 mm (5.82–9.50 in.)/
98–162 mm (3.87–6.38 in.)
Paper Weight
2
60–105 g/m (16–28 lb. Bond)
2
105–120 g/m (28–32 lb. Bond)
2
120–176 g/m (32–47 lb. Bond)
2
176–215 g/m (47–57 lb. Bond)
1-16
Input
Phaser 5500 Printer Service Manual
Output