Print Engine Sensor/Switch Tests Menu - Fuji Xerox Phaser 5500 Service Manual

Finisher Motor Tests (Continued)
Test
Rear Tamper Motor
Staple Head Move
Motor
Stapler Motor Forward
Stapler Motor Reverse
Eject Clamp Motor -
Up
Eject Clamp Motor -
Down
Eject Motor
Stacker Motor - Up
Stacker Motor - Down

Print Engine Sensor/Switch Tests Menu

Tests the functionality of sensors and switches located in the print engine. For the
Environmental Sensor, print a Configuration Page and check for the presence of
Temperature and Humidity readings. Test each device by manually toggling the
sensor or switch and viewing the results on the display.
Sensor / Switch Tests
Test
Door A Interlock SW
Door B Interlock SW
Front Cover Interlock
Tray 1/MPT Size
Sensor
Reference
Action / Requirement
Provides a sub-directory that includes tests to run the Rear Tamper
motor at the speed and position selected (Low Speed Outboard,
Mid Speed Outboard, High Speed Outboard, Low Speed Inboard,
Mid Speed Inboard, High Speed Inboard).
Provides a sub-directory that includes tests to run the Staple Head
motor at the speed and position selected (Low Speed Front,
Medium Speed Front, High Speed Front, Low Speed Rear, Medium
Speed Rear, High Speed Rear).
Runs the motor in forward. Place the staple head in its home
position prior to testing. A loose staple is generated in the forward
direction.
Runs the Staple Motor in reverse, opening the clamp. If the clamp is
already open, no movement occurs. To close the clamp, rotate the
black gear on the Staple Head until the clamp is closed (down
position). The clamp returns to the open position following the test.
To repeat the test, re-close the clamp.
Opens the Eject Clamp.
Closes the Eject Clamp.
Provides a sub-directory that includes tests to run the Eject motor at
the speed and direction selected (Low Speed Forward, High Speed
Forward, Low Speed Reverse, High Speed Reverse).
Lifts the Stacker Lower Tray to its upper limit.
Lowers the Stacker Lower Tray to its lower limit.
Action / Requirement
Displays the status, Open or Closed, of the Door A Switch.
Displays the status, Open or Closed, of the Door B Switch.
Displays the status, Open or Closed, of the Front Door Switch.
Displays the paper size indicated by the guides.
A-15