Tray 6 Sensor/Switch Tests Menu - Fuji Xerox Phaser 5500 Service Manual

Tray 4 & 5 Sensor/Switch Tests (Continued)
Test
Tray 5 Level Sensor
Tray 4 Pre Feed
Sensor
Tray 5 Pre Feed
Sensor
Tray 4 Feed Out
Sensor
Tray 5 Feed Out
Sensor

Tray 6 Sensor/Switch Tests Menu

Tests the functionality of Tray 6 sensors and switches by displaying the current state
while you manually toggle the selected device.
Tray 6 Sensor/Switch Tests
Test
Door J Interlock
Switch
Tray 6 Paper Size
Sensor
Tray 6 No Paper
Sensor
Tray 6 Level Sensor
Tray 6 Pre Feed
Tray 6 Feed Out
Tray 6 Interlock Switch
Tray 6 Paper Size
Sensor A
Tray 6 Paper Size
Sensor B
Tray 6 Tray In Sensor
A-18
Action / Requirement
Reports "Up" in the resting position, and "Down" when lifted. Test
the sensor by removing all but three or four sheets of paper from the
tray and reinserting it. Another method is to reach into the tray
cavity and operate the actuator manually.
Displays the status, "With or "Without Paper" when actuated.
Displays the status, "With or "Without Paper" when actuated.
Displays the status, "With or "Without Paper" when actuated.
Displays the status, "With or "Without Paper" when actuated.
Action / Requirement
Displays "Open" or "Closed" when actuated.
Displays the paper size indicated by the guide position.
Reports "Without Paper" in the resting position, and "With Paper"
when lifted.
Reports "Up" in the resting position, and "Down" when lifted.
Displays the status, "With Paper" or "Without Paper" of the sensor.
Displays the status, "With Paper" or "Without Paper" of the sensor.
Display the status, "Docked" or "Undocked" of the Docking Switch.
Displays "Guide is on a Sensor" or "Guide is off a sensor".
Displays "Guide is on a Sensor" or "Guide is off a sensor."
Displays the status, "In" or "Out" of the Tray-in sensor.
Phaser 5500 Printer Service Manual