Fuji Xerox Phaser 5500 Service Manual page 407

Using the Service Diagnostics Menu
1. Enter Service Diagnostics.
2. Select IP NVRAM
3. With PostScript NVRAM Reset
4. Resetting NVRAM! Are you sure?
When
press the OK button.
The printer then exits Service Diagnostics and reboots. While booting, NVRAM
is reset.
Using the Front Panel Shortcut
1.
At power-on, press the Back + OK buttons together.
2. Password
When
together within 2 seconds.
Adjustments and Calibrations
Access, then press the OK button.
highlighted, press the OK button.
appears, press and hold the Up Arrow + Down Arrow buttons
is displayed, highlight
Yes
and
6-13