Paper Handling; Main Motor; Drum Motor - Fuji Xerox Phaser 5500 Service Manual

Paper Handling

Paper is driven along the paper path by various drive motors, belts, gear assemblies
and rollers. Synchronization of these components is managed by the Engine Logic
Board. The operating system monitors sensors located along the paper path
throughout the print engine and attached options. As a sheet travels along the paper
path, sensors change state temporarily to indicate the sheet's presence. If the pattern
of sensor state changes differs from the expected timing for a particular paper size and
path, an error is reported.

Main Motor

The Main Motor, through the gear and pulley, drive the Take Away Roller, Feed
Roller, Registration Roller, Fuser, and Exit 1 OCT Roller.
Main Motor
Gear
Pulley 25T
Take Away Clutch
Gear-Exit
Take Away Bracket
Gear-19T
Regi Roller
Gear-18T Fuser OCT Roller
Feed Roller
Take Away Roller
s5500-020

Drum Motor

The rotating force of the Drum Motor is transmitted through the gears to components
that need mechanical driving force as shown in the following flow.
Drum Motor
Drum Magnetic Roller
Transfer Roller
s5500-021
2-4 Phaser 5500 Printer Service Manual