Exit 2 Motor Tests Menu; Trays 4 & 5 Motor Tests Menu; Tray 6 Motor Tests Menu - Fuji Xerox Phaser 5500 Service Manual

Exit 2 Motor Tests Menu

Test the Exit and Offset Motors in the Exit 2 Module. These tests run with the Exit.2
cover, Door E, open.
Exit 2 Motor Tests
Test
Offset Output Motor 2
Front
Offset Output Motor 2
Rear
Exit Output Motor 2
Forward
Exit Output Motor 2
Reverse
Exit 2 Fan
Trays 4 & 5 Motor Tests Menu
Test the Feed and Take Away motors in each tray feeder assembly.
Tray 4 & 5 Motor Tests
Test
Tray 4 Lift Motor
Tray 4 Feed Motor
Tray 5 Lift Motor
Tray 5 Feed Motor
Take Away Drive

Tray 6 Motor Tests Menu

Test the Feed/Lift and Take Away motors in Tray 6.
Tray 6 Motor Tests
Test
Tray 6 Lift Motor
Tray 6 Feed Motor
Reference
Action / Requirement
Runs the Exit 2 Offset motor shifting the OCT Roller shaft forward.
Runs the Exit 2 Offset motor shifting the OCT Roller shaft rearward.
Runs the Exit 2 Output Motor in the forward direction for two
seconds.
Runs the Exit 2 Output Motor in reverse for two seconds.
Runs the Exit 2 fan.
Action / Requirement
Runs the Feed/Lift motor in the Lift direction for two seconds.
Runs the Feed/Lift motor in the Feed direction for two seconds.
Runs the Feed/Lift motor in the Lift direction for two seconds.
Runs the Feed/Lift motor in the Feed direction for two seconds.
Runs the Take Away Drive Motor for five seconds.
Action / Requirement
Runs the Feed/Lift motor in the Lift direction for two seconds.
Runs the Feed/Lift motor in the Feed direction for two seconds.
A-13