Fuji Xerox Phaser 5500 Service Manual page 495

6.
Remove the Main Drive Belt (page 8-83).
PL7.1.7
Motor Assembly
CN102
Exit Flange
7.
Disconnect the two connectors from the Motor Assembly.
8. Remove the two screws securing the Take Away Clutch bracket to the frame and
to the Motor Assembly to remove the bracket.
9. Remove the four screws securing the Motor Assembly to the frame.
Replacement Note
Install the Motor Assembly by pushing the Gear on the upper part of the
Motor in the direction of the arrow.
FRU Disassembly
CN101
Take Away Clutch Bracket
Main Drive Belt
s5500-178
8-85