Resetting Connection Setup Values
Resetting the connection setup values resets the Printer Name, TCP/IP address, TCP/
IP address menu settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk,
NetWare, set IPX frame type, IPP, and Ethernet speed to their default values.
Caution
Before resetting the connection setup values to factory default values, make note
of the current network settings or print a Configuration Page to record the
printer's current network settings.
1.
From the Main menu, select
2.
Select
Connection
3.
Select
Reset Connection
4.
Reset Connection Setup
Select
Resetting Paper Handling Setup Values
Resetting the paper handling setup values resets the default paper source, 2-sided
printing, tray setup (default paper type/size), load paper timeout, tray sequence, tray
prompt, custom size paper units, default paper destination, job offset, output tray
switch, fuser temperature configuration, and reprint jammed pages settings.
1.
From the Main menu, select
2.
Paper Handling
Select
3.
Select
Reset Paper Handling
4.
Select
Reset Paper Handling Setup
Resetting PostScript Setup Values
Resetting the PostScript setup values resets the PostScript Error Info, Image
Smoothing, and Edge-to-Edge Printing settings.
1.
From the Main menu, select
2.
Select
PostScript
3.
Select
Reset PostScript
4.
Reset PostScript Setup
Select
6-10
Printer
Setup, then press the OK button.
Setup, then press the OK button.
NOW, then press the OK button.
Printer
Setup, then press the OK button.
Setup, then press the OK button.
Printer
Setup, then press the OK button.
Setup, then press the OK button.
NOW, then press the OK button.
Setup, then press the OK button.
Setup, then press the OK button.
NOW, then press the OK button.
Setup, then press the OK button.
Phaser 5500 Printer Service Manual