Tray 2 And 3 Level Sensor Actuator - Fuji Xerox Phaser 5500 Service Manual

5.
Remove the Tray 2 Feeder (page 8-20) or Tray 3 Feeder (page 8-21).
PL2.3.14
Harness
Hooks
6. Release the hooks securing the Sensor to the Upper Frame as shown in the figure.
7. Disconnect the connector from the No Paper Sensor.
8.
Remove the No Paper Sensor.

Tray 2 and 3 Level Sensor Actuator

1. Remove the Tray 1/MPT Rear Cover (page 8-16).
2.
Remove the Tray 1/MPT Feeder (page 8-32).
3.
Remove Door A (page 8-46).
4. Remove the Take Away Bracket (page 8-40).
FRU Disassembly
Upper Frame
Feeder
No Paper Sensor
s5500-109
8-25