Feed Out Sensor 3 - Fuji Xerox Phaser 5500 Service Manual

Feed Out Sensor 3

1.
Remove the Tray 1 Feeder (page 8-32).
2.
Remove Door A (page 8-46).
3. Open Door B.
PL4.5.18
Caution
The Take Away Chute is easily damaged if the latches located on the backside of
the chute are not released before attempting to remove the chute from the frame.
Release these latches before attempting to remove the Take Away Chute.
8-54
Take Away Chute
Feed Out
Sensor 3
Take Away Chute
Hook
Phaser 5500 Printer Service Manual
s5500-152