Finisher Motor Tests Menu - Fuji Xerox Phaser 5500 Service Manual

Tray 6 Motor Tests (Continued)
Test
Tray 6 Take Away
Motor -Slow
Tray 6 Take Away
Motor - Fast

Finisher Motor Tests Menu

Individually activate each Finisher motor. Most motor rotational tests run for two or
three seconds then stop.
Finisher Motor Tests
Test
Horizontal Transport
Motor - Fast
Horizontal Transport
Motor - Slow
Transport Motor
Registration Motor-
Fast-CW
Registration Motor-
Slow-CW
Registration Motor-
CCW
Exit Motor-Fast-CW
Exit Motor-Slow-CW
Exit Motor-CCW
Punch Unit Motor
Front
Punch Unit Motor
Rear
Punch Motor- 3 hole
Punch Motor- 2 hole
Punch Motor- 4 hole
Front Tamper Motor
A-14
Action / Requirement
Runs the Take Away Motor at low speed for two seconds.
Runs the Take Away Motor at high speed for two seconds.
Action / Requirement
Runs the Horizontal Transport motor at high speed.
Runs the Horizontal Transport motor at low speed.
Runs the Transport motor.
Runs the Registration motor clockwise at high speed.
Runs the Registration motor clockwise at slow speed.
Runs the Registration motor counter clockwise.
Runs the Exit motor at high speed in the clockwise direction.
Runs the Exit motor at slow speed in the clockwise direction.
Runs the Exit motor in the counter clockwise direction.
Moves the Punch forward.
Moves the Punch to the rear.
Performs a 3-hole punch.
Performs a 2-hole punch.
Performs a 4-hole punch.
Provides a sub-directory that includes tests to run the Front Tamper
motor at the speed and position selected (Low Speed Outboard,
Mid Speed Outboard, High Speed Outboard, Low Speed Inboard,
Mid Speed Inboard, High Speed Inboard).
Phaser 5500 Printer Service Manual