Fuji Xerox Phaser 5500 Service Manual page 370

Horizontal Deletions Troubleshooting Procedure (Continued)
Step Actions and Questions
3 Check the Drum Cartridge.
1. Install a new Drum Cartridge.
2. Print a Test Print.
Is the image density normal?
4 Check the Transfer Roller.
1. Remove the Transfer Roller.
2. Check the Transfer Roller for
contamination and wear.
Is there any contamination or
wear on the Transfer Roller?
5
Check the Heat and Pressure Roller.
WARNING:
Remove the Fuser.
Is there any contamination or
crack on Heat or Pressure Roller?
6 Check image development.
1. Print a Test Print.
2. Turn off the power while printing.
3. Carefully remove the Drum
Cartridge and check the image
formed on the drum right before
the Transfer Roller.
Is the image completely formed
on the drum? Is it clear, black, and
easy to read?
7 Check image transfer.
Check the image formed on the
drum, right after the Transfer Roller.
Is the image completely
transferred on the paper?
8 Check the HVPS.
1. Replace the HVPS (page 8-86).
2. Print a Test Print.
Is the Test Print normal?
9 Check the Engine Logic Board.
1. Replace the Engine Logic Board
(page 8-89).
2. Print a Test Print.
Is the Test Print normal?
5-24
Allow the Fuser to cool
before attempting to
remove it.
Yes
Problem solved.
Replace the
Transfer Roller
(page 8-44).
Replace the Fuser
(page 8-76).
Go to Step 7.
Go to Step 9.
Problem solved.
Problem solved.
Phaser 5500 Printer Service Manual
No
Go to Step 4.
Go to Step 5.
Go to Step 6.
Go to Step 8.
Go to Step 8.
Go to Step 9.
Replace the I/P Board
(page 8-91).